Star Micronics NX-2420 user manual Print area test mode, Stay in Panel Pitch, Stay in Panel Font

Page 37

Since the self-test occupies the full width of the carriage, it is recommended that the printer is loaded with the widest paper possible to avoid damage to the print head and/or platen. In addition, the total number of lines printed is considerable, more than can be accomodated on a single sheet, so fanfold paper is recommended for this test.

Print area test mode

SE&E&CT

By holding the(1 button down during power-up, the printer will enter the print area test mode. This way, you can find out how many lines on your paper are available for printing. The printer will print the first line message, then print the last line message after feeding to the bottom of the

page.

If you have loaded the fanfold paper, only the first line message is printed.

Stay in Panel Pitch

By holding the (PITCH)button down during power-up, the print pitch can only be selected from the control panel. This prevents software interference. You will hear an acknowledging beep as power comes on.

After the beep tone, you can set the printer off-line, select a print pitch, then return to on-line and start printing. The pitch you selected will not be reset or otherwise changed by any commands your software may issue.

Stay in Panel Font

By holding the (FONT) button during power-up, fonts can only be selected from the control panel. This prevents software interference. There will be an acknowledging beep as power comes on, after which you can set the printer off-line, select a font, then return to the on-line state and begin printing. The selected font will not be changed by any commands your software may issue.

Stay in Panel Pitch and Font

If you want to protect both the pitch and font settings from software changes, press both the (PITCH)and (FONT1buttons during power-up. There will be two acknowledging beep tones.

Pressing these buttons during power-up does not prevent you from making any number of changes later from the control panel.

29

Page 36 Page 38
Image 37
Page 36 Page 38
Contents NX-2420 Above statement applies only IOprinkrs marketed in the USA HOW to USE this Manual Page Features of the Printer Table of Contents Default Settings Specifications Chapter Checking the carton contents Printer’s external parts Den tifying printer partsMounting the platen knob Installing the ribbon cartridge and the roller unitFigum 1-4. Removing the top cover Page Hgure 1-7. Install the roller unit onto the printer Ins falling the optional cartridge Slide the cartridge into the slot with the power switch offConnecting the interface cable Connecting the printer to your computerLoading Single Sheets Automatic loadingFigure I-17. Loading a single sheet Manual loading Loading the paper from the rear of the printer Loading and Parking Fanfold FormsPage 75.Mounting the paper guide for fanfold forms Figure l-16.Pull up the tractor unit for bottom feeding Loading the paper from the bottom of the printerPaper parking Paper unparking Loading MULTI-PART Forms Adjusting the Printing GAP Paper Type Weight Memo Control Panel Operations Paper Feed button On Line buttonPitch button SET/EJECT/PARK buttonFont button POWER-UP Functions Short test modeLong test mode Stay in Panel Pitch Print area test modeStay in Panel Font Stay in Panel Pitch and FontLprint CHR$I Next Hexadecimal dumpOUT &H3BC,I OUT &H3BE,S OUT &H3BE,J Return Top of form Form feedReverse micro-feed Forward micro-feedChanging the auto loading value Clearing the buffer/All reset Store Macro Definition Selecting the print colorPage Default Settings Functions of the EDS SElTlNGS Page 1OCPIDRAFT 1OCPIHS Draft OFF 17CPIDRAFT Page LoFFloFFloml Bidirectional TEST/ADJUSTMENT Mode Raft On LNE Printer Control Commands Select draft pica characters Select draft quality charactersSelect draft elite characters Select draft condensed charactersSelect LQ pica characters Select CharactersSelect LQ elite characters Select LQ condensed CharactersSelect LQ font Select LQ proportional CharactersSelect font Select italic Characters Cancel emphasized printingSelect upright characters Emphasized printingStart underlining Cancel double-s trike printingStop underlining Starf VerliningSelect ornament character Select scoreSuperscript Subscript Cancel superscript or subscriptSelect standard character set Select IBM character setSelect character set #2 Select character Set #ISelect international character set Enable printing of all character codes on next character Enable printing of all character codesSelect IBM code Select normal zero Select slash zeroPica pitch Elite pitchCancel expanded printing Cancel condensed printingSemi-condensed Condensed printingExpanded printing for one line Cancel one-line expanded printingSelect character width Select proportional spacingSelect fixed spacing Select master print modeIncrease character spacing Select character size Select double or quadruple sizePrint double-height characters Select character height, width, and line spacing Return to normal heightSet line spacing to 7160or 7/72 inch Set line spacing to l/8 inchSet line spacing to l/6 inch Set line spacing to n/360 inchSet line spacing to n/180 inch or n/216 inch Set base unit for line spacingSet line spacing to n/60 inch or n/72 inch Select reverse feed mode Select forward feed modeExecute ES Line feedPerform one n/180-inch reverse line feed Perform one n/l804nch or n/216=inch line feedFeed paper n lines Set top of page at current positionSet page length to n inches Cancel bottom marginSet bottom margin Enable paper-out detector Disable paper-out detectorReturn to top of current Set vertical tab stopsSet vertical tab stops in channel Set vertical tab stops every n linesSelect vertical tab channel Vertical tabSet right margin Set left marginSet left and right margins Cancel automa tic line feedCarriage return Set automatic line feedCenter text Left justifyRight justify Full justifySet horizontal tab stops Reset all tab stopsSet horizontal tab stops every n columns Horizontal TabRelative horizontal tab in inches Relative horizontal TabAbsolute horizontal tab in inches Absolute horizontal tab in columnsPrint double-density g-bit graphics Print normal-density g-bit graphicsPrint double-density, double-speed g-bit graphics Print quadruple-density g-bit graphicsPrint hex-density 24-bit graphics Se/ect graphics modeConvert graphics Density Seiecf graphics modeDefine download characters ?n4 Select download character set Copy character set from ROM into RAMShift download character area Select draft elite download character set Select draft pica download character setSelect draft condensed download characters Select LQ pica download charactersSelect LQ condensed download characters Select L Q elite download charactersSelect LQ proportional download characters Select ROM character setSet MSB to Select print colorAccept MSB as is Cancel last lineDelete last character sent Set printer off-lineBell Stop printingBidirectional printing Unidirectional printingManual feed Reset printerAuto feed Eject paper from ASF

NX-2420 specifications

The Star Micronics NX-2420 is a leading-edge thermal printer designed to meet the diverse demands of modern businesses. Renowned for its compact design and robust build, the NX-2420 excels in performance and versatility, making it an ideal choice for retail, hospitality, and various other industries.

One of the standout features of the NX-2420 is its high-speed printing capability. With a print speed of up to 200 millimeters per second, it ensures that transactions are completed promptly, delivering receipts and labels without delay. This efficiency helps businesses provide superior customer service, especially during peak hours.

The NX-2420 supports multiple paper widths, accommodating various label and receipt sizes. This flexibility allows businesses to tailor their printing solutions to fit specific needs, whether they require larger labels for shipping or smaller receipts for purchases. The printer also utilizes direct thermal printing technology, eliminating the need for ink or toner. This not only reduces ongoing operational costs but also minimizes maintenance efforts, making it a user-friendly option.

Connectivity is a crucial aspect of the NX-2420. It offers a range of connectivity options, including USB, Ethernet, and Bluetooth, enabling seamless integration with existing systems and wireless printing from mobile devices. This flexibility is particularly beneficial for businesses that utilize point-of-sale (POS) systems and want to enhance their overall operational efficiency.

Another notable characteristic of the NX-2420 is its durability. Built to withstand the rigors of a busy environment, this printer features a robust casing and is designed to handle high-volume printing tasks. Furthermore, it operates quietly, contributing to a more pleasant working atmosphere for staff and customers alike.

In addition to standard printing capabilities, the NX-2420 is also equipped with advanced features such as an integrated cutter for precise label cutting and an optional built-in camera that enhances functionality in specific applications. This adaptability makes the NX-2420 suitable for a wide range of scenarios, from retail checkout counters to inventory management systems.

In conclusion, the Star Micronics NX-2420 is an exceptional thermal printer that combines speed, durability, and versatility. With its array of features and technologies, it stands out as a reliable choice for businesses looking to enhance their printing solutions and improve operational efficiency. Whether for creating receipts, labels, or tickets, the NX-2420 is poised to meet the demands of today's dynamic business environment.
Top Page Image Contents