Star Micronics NP-215, NP-415W Barcode print GS k n Dn NUL Code 1D h + 6B h + n + Dn + 00 h

Page 33

28) Barcode print

:<< GS k n Dn NUL >>

 

Code

: < 1D >h + < 6B >h + n + Dn + < 00 >h

* < 00n07 >h

Description

: Selects barcode symbology and prints barcode.

*The next print start position is on the line head

*Select following barcode symbology with “n” value.

*Dn indicates the character code to be printed.

n (Hex)

Barcode symbology

00

UPC-A

01

UPC-E

02

EAN-13 (JAN-13)

03

EAN-8 (JAN-8)

04

CODE 39

05

ITF

06

CODABAR

07

CODE128

*When there is data in the buffer this command is neglected.

*If character code Dn is not a printable character, following data after Dn will be treated as normal data.

*If the print character numbers are fixed in the barcode symbology the input character numbers should match to the print character numbers.

*If horizontal data exceed one line, the exceeded data cannot be printed.

29)

Barcode width size select :<< GS

w n >>

 

 

Code

: < 1D >h + < 77 >h + n

* < 02n04 >h

 

Description

: Selects width of barcode

 

 

* Default value of “n” is [03]h.

 

 

30)

Barcode height select

:<< GS h

n >>

 

Code

: < 1D >h + < 68 >h + n

* < 00n FF >h

 

Description

: Selects barcode height

 

*“n” shows the vertical dot number

*Default value of “n” is 162([A2]h).

31) Select of HRI character print position

:<< GS H n >>

 

Code

: < 1D >h + < 48 > h +n

* < 00n 03 >h

 

Description

: Selects the print position of HRI characters in printing barcode.

 

* “n” has the following meaning.

 

 

n (Hex)

Print position

 

 

00

No printing

 

01Above barcode

02Below barcode

03Above and below barcode

*HRI characters are the characters selected by “HRI character style select”.

*Default value of “n” is [00]h.

32) Select of HRI character style

:<<GS f n>>

 

Code

: <1D>h+<66>h+n

* < 00n 01 >h

Description

: Selects HRI character style in printing barcode

* “n” has the following meanings:

 

 

n (hex)

Style

 

 

 

00

Font A

 

 

01Font B

*Default value of “n” is [00]h.

30

Image 33
Contents Specifications for Read carefully Before Using the Printer Page NP 4 1 5 W Configuration Printer consists of the following components Codabar NW-7 CODE128 TOP Defects caused by dust or others This drawing is for NP-215P M3 screw holes to fix frame ground Frame ground wires Φ3.4 M3 screw holes to fix frame ground NP-325R This drawing is for NP-415WP Error ACK, BUSY, /STB, /ERROR, PE, SLCT, /INITSTB InitData STB Busy ACK PowerXON XoffGND PD1 PD0PD2 PD3CSW2 CSW1LED+ PNELED + ALMOFF ESC/POSXON/XOFF DTR/DSR Power OFF , /INIT Processing error Error detection detailsCN6 Control commands Control command table Feed pitch Font a Font B LSB LSB MSB MSB67DPI Data Underline set/reset ESC n Code 1B h + 2D h + n Bold print set/reset ESC E Code 1B h + 45 h + n Platen open Code 1B h + 7B h + n Barcode print GS k n Dn NUL Code 1D h + 6B h + n + Dn + 00 h MSB LSB 00 ≤n3 ≤01 h Code 1B h + 61 h + n 00 ≤n ≤02 h Description HEX Code 154 489 3908 1167 707 486 299 368 2940 Reverse print set and reset GS B n Code 1D h + 42 h + n Partition drive select GS % n Code 1D h + 25 h + n Page Page International character code table JST Parts Name QTY Material Treatment