51) Partition drive select | :<< GS % n >> |
| |||
Code | : < 1D > h + < 25 > h + n | * < 01≤n≤03 >h | |||
Description | : Selects partition drive. |
| |||
| * “n” indicates the following: |
| |||
| n(HEX) |
| Divide |
|
|
011 fixed partition
022 fixed partitions
03automatic partition
*Default value is selected by the DIP switch (1 or 2 partitions).
*If assigned beyond the specified area, the data is neglected and the select will not change.
*Automatic partition is as follows:
| 1 partition | 2 partitions |
Less than 215 dots | More than 216 dots | |
Less than 287 dots | More than 288 dots | |
Less than 415 dots | More than 416 dots |
52) Print density set | :<< GS ~ n >> |
|
Code | : < 1D > h + < 7E > h + n | * < 00≤n≤FF >h |
Description | : Sets print density in the range between 65% ~ 135% of the standard value, | |
|
|
* “n” ranges from 41h(65%) to 87h(135%). However, set it for actual use in the range 41h(65%) ≤ n ≤ 82h(130%).
*At the initial status, 100% or 125% can be selected by the DIP switch,
*This command has priority over the setting by DIP switch.
38