Star Micronics NP-215, NP-225, NP-325 specifications This drawing is for NP-415WP

Page 12

4) NP-415W dimensional drawing

5.9	156.1	6.0
		10.0

183.7

149.0

119.0

		φ4.5
28.0	112.0	28.0
	paper width

This drawing is for NP-415WP.

9

9

1

ＮＰ－４１５ＷＲ

115.5

82.2

54.3

paper exit

ＮＰ－４１５ＷＤ

Image 12

Contents Specifications for Read carefully Before Using the Printer Page NP 4 1 5 W Configuration Printer consists of the following components Codabar NW-7 CODE128 TOP Defects caused by dust or others This drawing is for NP-215P M3 screw holes to fix frame ground Frame ground wires Φ3.4 M3 screw holes to fix frame ground ＮＰ－３２５Ｒ This drawing is for NP-415WP ACK, BUSY, /STB, /ERROR, PE, SLCT, /INIT ErrorSTB InitPower Data STB Busy ACKXON XoffGND PD0 PD1PD2 PD3CSW1 CSW2LED+ PNEALM LED +OFF ESC/POSXON/XOFF DTR/DSR Processing error Error detection details Power OFF , /INITCN6 Control commands Control command table Feed pitch Font a Font B LSB MSB LSB MSB67DPI Data Underline set/reset ESC n Code 1B h + 2D h + n Bold print set/reset ESC E Code 1B h + 45 h + n Platen open Code 1B h + 7B h + n Barcode print GS k n Dn NUL Code 1D h + 6B h + n + Dn + 00 h MSB LSB 00 ≤n3 ≤01 h Code 1B h + 61 h + n 00 ≤n ≤02 h Description HEX Code 154 489 3908 1167 707 486 299 368 2940 Reverse print set and reset GS B n Code 1D h + 42 h + n Partition drive select GS % n Code 1D h + 25 h + n Page Page International character code table Parts Name QTY Material Treatment JST