Nortel Networks 400 4.0, BCM200 manual Regenerating a keycode after system replacement, Next step

182 Chapter 13 Initializing the system

To generate a keycode through the Nortel Keycode Retrieval System (KRS), you require:

•Username and password for the KRS (http://www.nortel.com/servsup/krs)

•BCM 4.0 feature authorization code for each feature

•BCM 4.0 system ID

You can apply a keycode file using:

•Element Manager (see “To enter a keycode” on page 195)

•Startup Profile (see “Using the Startup Profile to configure parameters” on page 205)

•Telset Administration (see “To enter the keycodes” on page 188)

For more information on keycodes, refer to the Keycode Installation Guide.

Regenerating a keycode after system replacement

If you replace your media services card (MSC), you must regenerate your keycode file to reflect the new system identification. Apply the keycode file after you perform your system data restore. For more information, refer to the Keycode Installation Guide.

Next step

After connecting to the BCM system, proceed to “Configuring the BCM system” on page 183.

N0060612