Nortel Networks BCM200, 400 4.0 manual Using Element Manager to set the basic parameters

Chapter 16 Using Element Manager to set the basic parameters 193

Chapter 16

Using Element Manager to set the basic parameters

The Element Manager application provides a computer-based client interface that can connect to devices over an IP network and display the programming interface for that device.

Through Element Manager, you can configure all of the basic parameters, which include:

•“Configuring the initial parameters” on page 195

•“Configuring the startup parameters” on page 198

Refer to the BCM 4.0 Administration Guide for more information on how to use Element Manager.

Figure 95 shows an overview of using Element Manager to set the basic parameters.

Figure 95 Overview of using Element Manager

BCM200/400 4.0 Installation and Maintenance Guide