Nortel Networks BCM200, 400 4.0 manual To connect the DSM16+, DSM32+, ASM8, GASM8, or 4x16 MBMs

Chapter 9 Connecting the cables 145

To connect the DSM16+, DSM32+, ASM8, GASM8, or 4x16 MBMs

1Wire 16 wire pairs from the amphenol connector to the local connecting blocks so they connect to the 16 station sets you want connected to this MBM.

Note: Use 16 wire pairs from each connector for the DSM 32.

Note: If you are connecting a DSM16+, 4x16, or DSM32+, use Table 48. If you are connecting an ASM8 or GASM8, use Table 49.

Table 48 provides the wiring scheme for the DSM16+, 4x16, and DSM32+ MBMs. The sets heading indicates the set numbering for each of the amphenol pairs. Set DNs are allocated by the BCM system based on the DS30 bus setting on the station MBM.

BCM200/400 4.0 Installation and Maintenance Guide