Nortel Networks 400 4.0 manual Configuring the startup parameters, To enter a name for your system

198Chapter 16 Using Element Manager to set the basic parameters

Table 68 Quick Install Wizard attributes

Attribute	Description
To Line	Enter the line number of the last line in the range of lines you want CallPilot to
	answer.
Number of rings	Enter the number of rings you want CallPilot to wait before answering lines.

5Click Install.

Configuring the startup parameters

Use the following procedures to configure the startup parameters for the BCM system using Element Manager:

•“To enter a name for your system”

•“To configure the date and time settings”

•“To configure DHCP server settings”

•“To configure IP Phones” on page 200

•“To configure SNMP settings” on page 201

•“To configure SNMP community strings” on page 202

•“To configure the SNMP manager list” on page 202

•“To create user accounts” on page 203

To enter a name for your system

1From the Configuration tab, click the System folder to expand it.

2Select Identification from the System folder.

3Enter a name for your system in the System name field.

To configure the date and time settings

1From the Configuration tab, click the System folder to expand it.

2Select Date and Time. The Date and Time panel opens.

N0060612