Nortel Networks BCM200, 400 4.0 manual To connect to the BCM system, To enter a keycode

Chapter 16 Using Element Manager to set the basic parameters 195

To connect to the BCM system

1Open BCM Element Manager.

2From the Network menu, select New Network Element, and then select Business Communications Manager.

3Enter the BCM system IP address, the username, and password (the default is are shown below):

IP address: 10.10.10.1

Username: nnadmin

Password: PlsChgMe!

4Click OK.

5From the Network Elements folder, select the BCM system IP address.

6Make sure that the correct username and password are entered.

7Click Connect.

You are now connected to the BCM system.

For more information on using BCM Element Manager, refer to the online Help within BCM Element Manager.

Configuring the initial parameters

Use the following procedures to configure the initial parameters for the BCM system using BCM Element Manager:

•“To enter a keycode”

•“To configure the LAN IP address”

•“To configure the modem” on page 196

•“To configure the startup template for telephony services” on page 197

•“To initialize voice mail” on page 197

To enter a keycode

1From the Configuration tab, click the System folder to expand it.

2Select Keycodes. The Keycodes panel opens.

3Click Connect to Nortel Keycode Retrieval System. The Open dialog box opens.

4Select the keycode file for your system and click Open.

Refer to the Keycode Installation Guide for details on how to retrieve and enter the keycodes for your system.

BCM200/400 4.0 Installation and Maintenance Guide