Nortel Networks 400 4.0, BCM200 manual To mount the main unit in an equipment rack

94Chapter 6 Installing the BCM main unit

Figure 52 Attach the rack-mount bracket to the BCM400 main unit

Install rack-mount

bracket screws

Figure 53 Attach the mounting bracket to the expansion unit

To mount the main unit in an equipment rack

1Determine the location in the rack where you want to install the main unit.

2Position the main unit in the rack. Have an assistant hold the main unit.

3Align the holes in the rack-mount bracket with the holes in the equipment rack rails.

4Fasten the rack-mount brackets to the rack using the four supplied screws (see Figure 54, Figure 55, or Figure 56).

N0060612