Nortel Networks BCM200, 400 4.0 manual 4x16 switch settings Select, Off 115-118 071 Not supported

Chapter 8 Installing a media bay module (MBM) 127

Table 38 shows the switch settings for each DS30 bus, and the assigned lines and dialing numbers (DNs) for each DS30 bus.

Table 38 4x16 switch settings

Select	Select		Enter these switch settings						To assign	And this DS30 bus	2 Custom DN
DS30
	offset	1		2	3	4	5	6	these lines	and DNs	range
bus #
02	0	on		on	on	on	on	on	211-214
										DS30, bus 03
	1								219-222	237-252(2.5 upgrade)
		on		on	off	on	on	on
	2	on		off	on	on	on	on	227-230	253-268(new system)
	3	on		off	off	on	on	on	235-238
03	0	on		on	on	on	on	off	181-184	DS30, bus 04
	1	on		on	off	on	on	off	189-192
										253-268(2.5 upgrade)
	2	on		off	on	on	on	off	197-200
										285-292(new system)
	3	on		off	off	on	on	off	205-208
04	0	on		on	on	on	off	on	151-154	DS30, bus 05
	1	on		on	off	on	off	on	159-162
										269-284(2.5 upgrade)
	2	on		off	on	on	off	on	167-170
										317-332(new system)
	3	on		off	off	on	off	on	175-178
05	0	on		on	on	on	off	off	121-124	DS30, bus 06
	1	on		on	off	on	off	off	129-132
										285-300(2.5 upgrade)
	2	on		off	on	on	off	off	137-140	349-364(new system)
	3	on		off	off	on	off	off	145-148
06	0	on		on	on	off	on	on	91-94	DS30, bus 071
	1	on		on	off	off	on	on	99-102
										301-316(2.5 upgrade)
	2	on		off	on	off	on	on	107-110	381-396(new system)
	3	on		off	off	off	on	on	115-118
071									Not supported

1If your system is configured with a 3/5 DS30 split, you cannot configure this module for DS30 6 because DS30 7 is not available for the second level.

2The extensions listed are based on a three-digit DN with a Start DN of 221. If your system has longer DNs or a different Start DN, enter the range in the blank column.

BCM200/400 4.0 Installation and Maintenance Guide