Nortel Networks BCM200, 400 4.0 manual Task List

Task List 5

Task List

Installing the BCM main unit	. 91
To attach the rack-mount brackets	93
To mount the main unit in an equipment rack	94
To install the main unit on the wall	96
To install the BCM main unit on a table or shelf	99
Installing an expansion unit	101
To connect the expansion unit to the main unit	104

Installing a media bay module (MBM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

To select trunk MBMs	106
To select station MBMs	108
To determine bus requirements	113
To determine MBM DIP switch settings	116
To set MBM DIP switches	120
To install an MBM in the BCM main unit or expansion unit	136
Connecting the cables	137
To connect power and wiring	138
To check system power and status	139
To connect DTM, CTM, CTM8, BRIM S/T, or 4x16 MBMs	142
To connect the GATM	143
To connect the DSM16+, DSM32+, ASM8, GASM8, or 4x16 MBMs	145
To connect the fiber cables	148
To connect the BCM system to the WAN	157
To connect the modem	157
Installing telephones and peripherals	161
To install the emergency telephone	165
Installing the analog terminal adapter	167
To connect the ATA2	169
To mount the ATA2 on a wall	170
To measure the insertion loss from the CO to the analog device	171
To measure the insertion loss from the analog device to the CO	171
Installing optional telephony equipment	173
To install an auxiliary ringer	173
To install an external paging system	174
To connect an external music source	176
Initializing the system	177
To connect the Ethernet crossover cable	178
To configure your computer	179
To display the configuration menus	180

BCM200/400 4.0 Installation and Maintenance Guide