Nortel Networks BCM200, 400 4.0 manual Dect combinations, All station MBMs set for double density

Chapter 9 Connecting the cables 153

Table 54 demonstrates either a double-density system.

Table 54 All station MBMs set for double density

	Each heavily-outlined and shaded square represents one
			module				Switch setting
DS30				2
	1	1		ASM8s/	2
channel	DSM32+	DSM16+		GASM8	DTMs
#	offset 0	offset 0		offset 0 and 1	offset 0	1	2	3	4	5	6
2	0	DSM 32+ settings:				off	on	on	on	on	on

3 0 DSM 32+ settings: off on on on on off

4	0	DSM 16+ settings:		off	on	on	on	off	on
	0	DSM 16+ settings:		off	on	off	on	off	on
5		0	ASM 8 settings:	on	on	on	on	off	on
		1	ASM 8 settings:	on	on	off	on	off	on
		0	ASM 8 settings:	on	off	on	on	off	on
		1	ASM 8 settings:	on	off	off	on	off	on
6			0	on	on	on	off	on	on

7

0

on on on off on off

DECT combinations

This section describes a system containing a DECT MBM, three BRIM MBMs, and two DSM 32s. This configuration uses all the DS30 channels, with the exception of one offset.

Table 55 demonstrates this combination, including the switch settings for each MBM.

BCM200/400 4.0 Installation and Maintenance Guide