Nortel Networks BCM200, 400 4.0 manual Software keycode, Configuration main menu screen

Chapter 13 Initializing the system 181

aIf using a terminal emulation program (Hyperterminal), attach a configuration computer to the BCM main unit serial port (recommended method).

bIf you are accessing the BCM main unit through your local area network through SSH (secure socket shell), use the default IP address 10.10.10.1.

5When prompted for a User ID, type: nnadmin

6When prompted for a Password, type:

PlsChgMe!

7The Configuration main menu screen appears. Refer to Figure 92.

Figure 92 Configuration main menu screen

8Enter the number of the parameter you want to configure.

Software keycode

You require a keycode to enable software features on the BCM system. You receive only one keycode whether you purchase one feature or a bundle of features.

To generate a keycode, you require an authorization code for each feature you purchase.

For example, if you have one feature, you receive one authorization code and you will generate one keycode. If you purchase four features, you receive four authorization codes, however, you will still generate only one keycode.

BCM200/400 4.0 Installation and Maintenance Guide