Nortel Networks 400 4.0, BCM200 manual Global analog trunk parameters, Pulse Dialing ms

368Appendix G Market profile attributes

Global analog trunk parameters

This section contains information for the GATM4 and GATM8 MBMs. The information in the tables applies to downloaded profiles only; it is not applicable to DIP switch modes.

Global analog trunks are not supported in the following market profiles: Denmark, France, Germany, Holland, Italy, Norway, Spain, Sweden, and Switzerland.

For PRC and Hong Kong, analog trunks are available in North American DIP switch mode only.

The global analog trunk parameters are provided in the following tables:

•Localization, PSTN standards, and pulse dialing parameters (see Table 101)

•Transmission parameters (see Table 102)

•Call supervision parameters (see Table 103)

•On-hook caller ID, disconnect supervision, and message waiting parameters (see Table 104)

Table 101 Localization, PSTN standards, and pulse dialing parameters (Sheet 1 of 2)

				Pulse Dialing (ms)
			Break		Make	Interdigit
Market profile	Localized	PSTN standards	time		time	time
Australia	Yes	[1] AS/ACIF S003:2005 (2nd	85		15	860
		Edition) — Customer Access
		Equipment for Connection to a
		Telecommunications Network
		[2] AS/ACIF S002:2001 —
		Analogue interworking and
		non-interference requirements for
		Customer Equipment for
		connection to the Public Switched
		Telephone Network
Brazil	Yes	[1] Identification of the Calling Party	66		34	800
		for SPC With DTMF, 220-250-713.
		[2] Si3050 Global Voice/Data Direct
		Access Arrangement Specification.
CALA	No	N/A	60		40	700
	(North American
	based A-law)
Canada	Yes	N/A	60		40	700
Caribbean	Yes	N/A	60		40	700
Global	No (North American	N/A	60		40	700
	based A-Law)
Mexico	Yes	[1] Mexico general Specification,	60		40	700
		June 9, 1993
New Zealand	No (UK-based	N/A	66		34	740
	telephony with
	Australian tones)
North America	Yes	N/A	60		40	700

N0060612