To configure IP Phones

200Chapter 16 Using Element Manager to set the basic parameters

Table 70 Subnets: General Settings attributes (Sheet 2 of 2)

Attribute	Description

WINS node type	Allows you to specify a client’s WINS node type.
	The BCM system automatically sets this value to H-node on all DHCP clients.
	This setting configures the DHCP client PCs to use P-node name resolution
	before resorting to B-node name resolution. This is efficient when a WINS
	server is configured for the network. The BCM system also includes a WINS
	server.
	Note: Use caution if you change this attribute.

Default gateway	Allows you to specify the IP address of the default next-hop router.
	BCM automatically assigns the value for this parameter. If the IP address or
	subnet mask for the corresponding LAN interface changes, this value is
	overwritten. Use caution when changing this value.

Lease time	Allows you to specify the time, in seconds, for an address assignment until the
	client’s lease expires.
	The default is 259200 seconds (72 hours).

Table 71 DHCP server: IP Terminal DHCP Options attributes

Attribute	Description

VLAN identifiers	Allows you to specify the Virtual LAN (VLAN) ID numbers that are given to the
(comma-delimited)	IP telephones.

TFTP Server	Allows you to specify the IP address of the TFTP server that is used by WLAN
	IP telephones. If your system does not have WLAN IP telephones, leave this
	box empty.
	Enter the IP address in a valid dot format.

WLAN IP Telephony	Allows you to specify the IP address of the SVP server that is used by WLAN
Manager 2245	IP telephones. If your system does not have WLAN IP telephones, leave this
	box empty.
	Enter the IP address in a valid dot format.

1From the Configuration tab, click the Resources folder to expand it.

3From the Actual Type column, select IP & App Sets.

The Details for Module area displays in the lower pane with the IP Terminal Global Settings tab as the default.