Nortel Networks BCM200, 400 4.0 manual To install the BCM main unit on a table or shelf, Next step

Chapter 6 Installing the BCM main unit 99

Caution: Do not place anything directly on top of the BCM main unit or expansion unit.

To install the BCM main unit on a table or shelf

1Attach four rubber feet to the corners on the bottom of the main unit.

2Position the main unit on the table or shelf.

3Make sure you leave enough space around the unit for ventilation and access to the cables and media bay modules.

Next step

If you are installing an expansion unit, proceed to “Installing an expansion unit” on page 101. Otherwise, proceed to “Installing a media bay module (MBM)” on page 105.

BCM200/400 4.0 Installation and Maintenance Guide