Nortel Networks BCM200, 400 4.0 manual Startup parameters overview, Startup parameters Sheet 1

Chapter 14 Configuring the BCM system 185

Startup parameters overview

The startup parameters are the remaining required parameters that cannot be configured using Telset Administration. These parameters must be configured using Element Manager or the Startup Profile. See Table 65 for a list of the startup parameters.

Table 65 Startup parameters (Sheet 1 of 2)

Parameters		Telset Administration	Element Manager	Startup Profile
System:		N/A	Configuration > System >	System
•	System name		Identification
			(ID set automatically)
System:		N/A	Configuration > System >	System
•	System ID		Keycodes
			(View ID - it is set
			automatically and cannot
			be changed)
Time:		N/A	Configuration > System >	Time
• Date and Time source			Date and Time
•	NTP server address
•	Date and time
•	Time zone
DHCP server:		N/A	Configuration > Data	DHCP Server
•	Enable/disable server		Services > DHCP Server >
			Subnets tab
•	IP domain name
•	Primary DNS
•	Secondary DNS
•	Default gateway
IP Phones:		N/A	Configuration > Resources	IP Telephones
•	Enable registration		> Telephony Resources
•	Enable global pwd
•	Global pwd
• Auto-assign DNs
•	Advertisement logo
SNMP Agent:		N/A	Configuration >	SNMP Agent
•	Enable/disable SNMP		Administrator Access >
			SNMP > General tab
	agent
•	Minimum security
•	SNMP version support
SNMP community:		N/A	Configuration >	SNMP Community
•	Community string		Administrator Access >
			SNMP > Community
•	Type of access
			strings tab

BCM200/400 4.0 Installation and Maintenance Guide