Nortel Networks BCM200, 400 4.0 manual BCM400 redundant power supply and modules

Chapter 2 Introducing the BCM hardware 65

Figure 39 BCM400 redundant power supply and modules

Power supply module removed from the redundant power supply unit

Power supply module inserted in the redundant power supply unit

Figure 40 BCM400 redundant power supply connectors

Connector Configuration for	Cable Lengths and
Redundant Sparkle Power Supply	Markings
	550mm (P2)
	550mm (P3)
	325mm to first
	(P4), +50mm to
	next (P5),
	+100mm to last
	(P6) (total 475mm)
	340mm to first
	(P7)(right angle) ,
	+150mm to next
	(P8) (total 490mm)

515mm (P1)

515mm (P9)

515mm (PA)

300mm (PB)

Purpose and Notes

Route to Media bay backplane 1: Tie any slack at the connector (behind the MBM).

Route to Media bay backplane 2: Tie any slack at the connector (behind the MBM).

To hard disk: Tie any slack at the power supply. Tuck any loose connectors under the hard disk

Unused. Tie to the center of the hard disk cage.

Route to the I/O card.

Route to the I/O card.

Route to the I/O card.

Unused

In addition, international (non-North American) users require a power supply adapter cord for each main unit and expansion unit.

BCM200/400 4.0 Installation and Maintenance Guide