Nortel Networks 400 4.0, BCM200 manual Configuring the media bay module, To configure the MBM

212Chapter 18 Completing the initial installation (optional)

After the basic configuration is completed, you can further customize your system by using the following configuration options:

•“Configuring the media bay module”

•“Configuring modem settings” on page 213

•“Checking for software updates” on page 213

•“Configuring voice mail” on page 213

•“Customizing security policies” on page 213

•“Performing a backup” on page 214

Configuring the media bay module

For information on installing a media bay module (MBM) and setting the DIP switches, refer to “Installing a media bay module (MBM)” on page 105.

You can also refer to “Connecting the BCM expansion unit to the BCM main unit” on page 103 for more details on connecting the cables between the main unit and expansion unit.

To configure the MBM

1Open BCM Element Manager and connect to your BCM system.

2From the Configuration tab, click the Resources folder to expand it.

3From the Resources folder, select Telephony Resources (see Figure 98).

Figure 98 Telephony Resources page

4In the Modules section, select the row of the MBM that you want to configure.

5Double-click the Prog Type field to display the drop-down list.

N0060612