Nortel Networks BCM200 GASM8 modes and features, GASM8 modes Standard Enhanced Mode features

Chapter 8 Installing a media bay module (MBM) 129

The mode used defines which features are available, as shown in Table 40.

Table 40 GASM8 modes and features

GASM8 modes
Standard	Enhanced	Mode features
•	•	Basic call features for analog devices
•	•	Message Waiting Indication (MWI)
	•	Firmware download capability
	•	Disconnect Supervision
	•	Calling Line Identification (CLID)

The GASM8 has the following switches:

•Switch 1: firmware download capability

—off = Standard mode

—on = Enhanced mode

•Switch 2: when to download firmware (for the enhanced mode only)

—off = automatic firmware download from BCM (default)

—on = forced firmware download from BCM system cold start

•Switch 3: echo cancellation

—off = Enabled (default)

—on = Disabled

•Switches 4-8: settings choices are based on a country profile. Refer to the tables below for the correct settings to ensure proper functionality.

Standard mode

Mode select
DIP switch						Country select
	settings				DIP switch settings
										Country profile
1		2	3	4		5	6	7	8
off		off	off	off		off	off	off	off	North America
off		off	off	off		off	off	off	on	United Kingdom
off		off	off	off		off	off	on	off	Australia
								on
off		off	off	off		off	off		on	Poland

Note: Switch settings not shown in this table will default to the North American profile.

Enhanced mode

on	off	off	off	off	off	off	off	North America
on
	off	off	off	off	off	off	on	United Kingdom
on
	off	off	off	off	off	on	off	Australia
on						on
	off	off	off	off	off		on	Poland

BCM200/400 4.0 Installation and Maintenance Guide