Nortel Networks BCM200, 400 4.0 manual Base function tray component hardware

Chapter 2 Introducing the BCM hardware 39

Figure 7 Advanced function tray RAID status LEDs

Primary Mirror	Alarm Reset
	Status

Base function tray component hardware

This section describes the following base function tray components:

•“Base function tray faceplate components” on page 39

•“Base function tray internal components” on page 40

•“Main card” on page 43

•“Data networking components” on page 46

•“I/O interface card” on page 48

Base function tray faceplate components

Figure 8 illustrates the base function tray faceplate components. Table 5 describes the faceplate components.

Figure 8 Base function tray faceplate components

System status LEDs Reset button

			WAN card
			MSC
			USB port
Modem port	COM port	Ethernet	Ethernet
	(serial port)	port 2	port 1

BCM200/400 4.0 Installation and Maintenance Guide