Nortel Networks BCM200, 400 4.0 manual GASM8 parameters, Transmission, Input

Appendix G Market profile attributes 371

Table 104 On-hook caller ID, disconnect supervision, and message waiting parameters (Sheet 2 of 2)

	On-hook caller ID		Disconnect supervision			Message waiting
		DTMF
Market		(Start Digit,			Line		Voltage	Stutter
profile	FSK	Stop Digit)	OSI	Busy tone	reversal	FSK	reversal	dial tone
North	Bellcore	Not	Yes	No	No	Supported	Not	Not
America		supported					supported	supported
Poland	ETSI	Not	No	Supported in	Supported	Supported	Not	Not
		supported		unsupervised	in		supported	supported
				mode	supervised
				(425 Hz, 500	mode
				ms On/ 500
				ms Off)
Taiwan	ETSI	Supported	No	Supported	No	Supported	Not	Not
		(D, C)		(480 + 620			supported	supported
				Hz, 500 ms
				On/ 500 ms
				Off)
United	ETSI	Not	Yes	No	No	Supported	Not	Not
Kingdom		supported	(500ms UK				supported	supported
			Guarded
			Clear)

GASM8 parameters

This section contains information for the GASM8 MBM.

Global analog stations are not supported in the following market profiles: Brazil, CALA, Denmark, France, Germany, Holland, Italy, Norway, PRC, Spain, Sweden, Switzerland, and Taiwan.

The GASM8 parameters are provided in the following tables:

•Localization, DIP switch settings, specifications, and transmission parameters (see Table 105)

•Loop interface and call supervision (see Table 106)

•Dial pulse and DTMF parameters (see Table 107)

Table 105 Localization, DIP switch settings, specifications, and transmission parameters (Sheet 1 of 2)

					Transmission
		DIP		Input				Bi-	PCM
Market		switch		source	Reference		Load	directional	coding
profile	Localized	setting	Specifications	impedance	impedance		impedance	gain	scheme
Australia	Yes	Australia	TS 003	300	+ (820	120 nF)		1.3 dB	CCITT
			TCE2						A-law
Canada	Yes	North	Refer to North		600			3 dB	CCITT
		America	America spec						mu-law
Caribbean	Yes	North	Refer to North		600			3 dB	CCITT
		America	America spec						mu-law

BCM200/400 4.0 Installation and Maintenance Guide