Nortel Networks 400 4.0, BCM200 manual To connect an external music source, Music-on-hold jack

176Chapter 12 Installing optional telephony equipment

To connect an external music source

1Connect the miniature jack of the music source output to the music-on-hold input on the MSC. Refer to Figure 89.

Figure 89 Music-on-hold jack

Ring - No connection MSC faceplate

Tip - Music signal

Music-on-hold input

Sleeve - Ground

2Adjust the volume of the music source to an appropriate level by activating Background Music and adjusting the volume at the music source.

Tip: You can adjust the Background Music volume at every telephone.

3Enable music for callers on hold and for background music through programming.

Next step

After you have connected the cables to the BCM system, you can configure the BCM system. Refer to “Configuring the BCM system” on page 183 for information about configuring the BCM system.

N0060612