Nortel Networks 400 4.0, BCM200 manual Installing the main unit on a flat surface

98Chapter 6 Installing the BCM main unit

Figure 57 Attach the wall-mount brackets to the BCM200 main unit

Install wall-mount

bracket screws

Figure 58 Attach the wall-mount brackets to the BCM400 main unit

Install wall-mount

bracket screws

8Hang the BCM main unit on the backboard screws. Make sure the main unit is level. Ensure the wood screw heads seat fully into the wall-mount bracket slots.

9Tighten the wood screws against the wall-mount bracket.

Installing the main unit on a flat surface

Use this procedure to install the BCM main unit on any flat surface that can safely support the weight of the unit.

Caution: Refer to “Environmental requirements” on page 87 for acceptable environmental conditions before selecting a location for the BCM main unit.

N0060612