Nortel Networks BCM200, 400 4.0 manual Settings field description Perform the activity

Chapter 19 System monitoring and troubleshooting 223

3In the Settings area, ensure the following fields display the default values as shown (see Table 80):

a Operation Mode = Mirror Mode

b Beep on drive failure = Every 30 seconds (you can configure the interval between beeps).

Note: On some systems, if the RAID card fails, the audible alarm sounds continuously for 15 seconds. After the 15 second period, the beep alarm sounds in accordance to the beep timing setting.

Figure 103 Disk mirror settings screen

Table 80 Setting field descriptions and actions

Settings field description	Perform the activity
Operation Mode: Options available are	Nortel recommends that you select Mirror mode from the
Primary Only, Mirror Only, or Mirror Mode	drop-down menu
(default value).	You can disable the mirroring function and operate from either
	the primary master or the mirror master drive only. Use this
	option to isolate drive problems.
Beep on drive failure: Options available	Select the beep timing interval for alarm notification.
are disabled, continuously, Every 5	On some systems, if the RAID card fails, the audible alarm
seconds, or Every 30 seconds (default
	sounds continuously for 15 seconds. After the 15 second
value).
	period, the beep alarm sounds in accordance to the beep
	timing setting.

BCM200/400 4.0 Installation and Maintenance Guide