Nortel Networks 400 4.0, BCM200 manual To install an MBM in the BCM main unit or expansion unit

136 Chapter 8 Installing a media bay module (MBM)

To install an MBM in the BCM main unit or expansion unit

1Ensure that the switches on the MBM are set correctly. For information about how to set the switches, refer to “Determining MBM DIP switch settings” on page 116. In the case of FEM modules, the switches activate the front ports. Ensure that the switches accurately reflect the ports you require. Refer to “FEM switch settings” on page 133.

2Select an open media bay.

3With the face of the MBM facing toward you, insert the MBM into the open bay.

4Push the MBM completely into the unit. You will hear a click when the MBM is firmly seated in the media bay.

5Repeat steps 2 to 4 for each MBM you want to install.

N0060612