Nortel Networks BCM200, 400 4.0 manual Using Telset Administration to set the basic parameters

Chapter 15 Using Telset Administration to set the basic parameters 187

Chapter 15

Using Telset Administration to set the basic parameters

Telset Administration allows you to use a digital telephone with a two-line display to set the BCM configuration parameters. You cannot set all the basic parameters using Telset Administration. Therefore, after configuring the initial parameters, you must use Element Manager to set the startup parameters. Refer to “Configuring the startup parameters” on page 198.

Refer to the BCM 4.0 Telset Administration Guide for more information on Telset Administration.

Figure 94 shows an overview of using Telset Administration to set the basic parameters.

Figure 94 Overview of using Telset Administration

BCM200/400 4.0 Installation and Maintenance Guide