Star Micronics NX-2410 Select character type and print pitch, Vertical Position Commands

Select character type and print pitch

Mode	ASCII					Decimal		Hexadecimal
IBM	< ESC >	“I”	n			27 73	n	1B 49 n
	Selects	a combination		of character type and print pitch according to the
	value of n as shown below.
		n	Character		type	Print	pitch
		0	Resident		Draft	Pica
		8	Resident		Draft	Elite
		16	Resident		Draft	Condensed
		2	Resident		LQ	Pica
		10	Resident		LQ	Elite
		18	Resident		LQ	Condensed
		3	Resident		LQ	Proportional
		4	Download		Draft	Pica
		12	Download		Draft	Elite
		20	Download		Draft	Condensed
		6	Download		LQ	Pica
		14	Download		LQ	Elite
		22	Download		LQ	Condensed
		7	Download		LQ	Proportional

Ignored if the printer was set to stay in panel pitch and/or panel style at power-up.

VERTICAL POSITION COMMANDS

Set line spacing to 718 inch

Mode	ASCII				Decimal	Hexadecimal
Both	tESC>		“0”	27	48	IB 30
	Sets	the distance		the paper advances	or reverses in subsequent		line feeds
	to	l/8	inch.

Set line spacing to 7160 or 7172 inch

Mode

Both

ASCII			Decimal	Hexadecimal
< ESC	>	“1”	27 49	1B 31

Sets the distance the paper advances or reverses in subsequent line feeds to 7/60 inch (Standard mode) or 7/72 inch (IBM mode).