Star Micronics NX-2410 user manual Define line spacing to n/72 inch, Execute ESC a, Line feed

Define line spacing to n/72 inch

Mode	ASCII			Decimal	Hexadecimal
IBM	<ESC>	“A”	n	27 65 n	1B 41 n

Defines the distance the paper advances or reverses in subsequent lines feeds to n/72 inch, where n is between 1 and 85. If n = 0, this command is ignored. The new line spacing does not take effect until the next < ESC > “2” command.

Execute < ESC > “A”

Mode	ASCII		Decimal	Hexadecimal
IBM	‘ESC>	“2”	27 50	1B 32

Sets the line spacing to the value defined by the last preceding < ESC >

“A” command. Sets the line spacing to l/6 inch if there is no preceding < ESC > “A” command.

Line feed

Mode	ASCII	Decimal	Hexadecimal
Both 1	<LF>		I
		1 10	IOA

Prints the current line and feeds the paper to the next line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the

preceding commands for the line spacing.

Reverse line feed

Mode	1	ASCII		Decimal	Hexadecimal	I
Both	1	<ESC>	<LF>	27 10	IlB OA	I

Prints the current line and feeds the paper in the reverse direction to the preceding line. If DIP switch l-2 is ON, also moves the next print position

to the left margin. See the preceding commands for the line spacing. Ignored when friction feed is used.

Select forward feed mode

Mode

Std. 1

ASCII		Decimal	Hexadecimal
<FS>	“F”	1 28 70	IlC 46	I
Cancels the reverse feed mode and selects forward feed mode. This is the
default setting at power-up.

Select	reverse	feed	mode
I Mode I	ASCII		I	Decimal	I Hexadecimal	I
					i
Std.	<FS>	“R”	28	82	1C 52

Selects reverse feed mode. Reverses the direction of all vertical move- ments. Ignored when friction feed is used.