Star Micronics LC-90 NX-1010 user manual Using the General window, To change a parameter setting

Using the General window 19

The other type of parameter box are “toggle” type, which means that you select one setting or the other.

RAM usage

(•) Input Buffer	*
( ) Download

Note that with both types of parameter boxes, the currently selected setting is indicated by a ball inside the parentheses on the left of the setting.

Asterisks to the right of the parameters indicate default settings.

To change a parameter setting

❏Select the parameter box (by clicking inside it with the mouse or by moving to it by pressing Tab) that contains the setting you want to change.

❏Highlight the setting you require by clicking on it with the mouse, or by using the up and down arrows. Then select that setting by clicking the mouse or by pressing the space bar.

A setting is selected when there is a ball inside the parentheses on the left of the setting. Remember that if the parameter box has up and down arrows on the right side, you may have to scroll through the settings in order to display the one that you want before you can select it.

Using the General window

While in the User Setup Utility, select General from the menu bar.

Exit Load Save General

Font Paper Adjust. Port Help

Emulation	(•) Standard	*	RAM
	( ) IBM		usage
NLQ			Sleep
	(•) Uni-direction	*
Direction	( ) Bi-direction
A.E.C.			Demo
	(•) Enabled	*
	( ) Disabled		Print

(•)	Input Buffer	*
( ) Download
(•)	15 min.	*
( )	30 min.
(•)	Self-print short	*
( )	Self-print long

Current Data: Current General Setting

TAB	= Next Box
SPACE	= Set Function

=Scroll up

=Scroll down

= Menu Select

The following describes the various settings that are available for each parameter on this screen.