Star Micronics LC-90 NX-1010 user manual Choose a different line

Page 57

51

Problem

Possible Cause

Recommended Action

 

 

 

Line spacing is incorrect.

Jamming paper.

Set up the printer for the

 

 

paper thickness you are

 

 

using. See “Adjusting for

 

 

paper thickness” on page 40.

 

 

 

 

The line spacing or leading

Choose a different line

 

selected your application

spacing or leading setting

 

program is wrong.

from your application.

 

 

 

 

Auto line feed with carriage

Use the User Setup Utility to

 

return is enabled by the User

disable auto line feed with

 

Setup Utility.

carriage return. See “Auto

 

 

LF with CR” on page 24.

 

 

 

Lines print over each other.

Auto line feed with carriage

Use the User Setup Utility to

 

return is disabled by the

enable auto line feed with

 

User Setup Utility.

carriage return. See “Auto

 

 

LF with CR” on page 24.

 

 

 

 

Jamming paper.

Set up the printer for the

 

 

paper thickness you are

 

 

using. See “Adjusting for

 

 

paper thickness” on page 40.

 

 

 

Incorrect number of lines are

Auto line feed with carriage

Use the User Setup Utility to

printed on the page.

return is enabled by the User

disable auto line feed with

 

Setup Utility.

carriage return. See “Auto

 

 

LF with CR” on page 24.

 

 

 

 

The line spacing or leading

Choose a different line

 

selected by your application

spacing or leading setting

 

program is wrong.

from your application.

 

 

 

Text and graphics are

Vertical dot adjustment is not

Use the User Setup Utility to

malformed.

set properly.

set the printer’s vertical dot

Print quality is poor.

 

alignment.

 

 

 

 

The printer is not set up

Set up the printer for the

 

correctly for the thickness of

paper thickness you are

 

paper being used.

using. See “Adjusting for

 

 

paper thickness” on page 40.

 

 

 

Page 56 Page 58
Image 57
Page 56 Page 58
Contents LC-90 NX-1010 VDE Statement Trademark acknowledgments Chapter About this manualContents Other Printing Features Using the Printer with MS-DOSChapter a Troubleshooting Control Panel OperationsChoosing a place for the printer Printer SetupUnpacking the printer Printer SetupGeneral guide General guideOpening the front cover Installing the ribbon cartridge Installing the ribbon cartridgeInstalling the paper support Connecting to your computer Connecting to your computerPrinter Setup Connecting to a power outlet Connecting to a power outletLoading paper Paper guide Loading paper Detaching the automatic sheet feeder Detaching the automatic sheet feeder Re-installing the automatic sheet feeder Installing the User Setup Utility User Setup UtilityExecute the command that installs the User Setup Utility User Setup UtilityStarting up the User Setup Utility Starting up the User Setup UtilityTo select a window Changing User Setup Utility parameter settingsTo select a parameter box About parameter boxesUsing the General window Using the General windowTo change a parameter setting NLQ Direction EmulationRAM usage SleepDemo Print Print mode Using the Font windowNLQ Font PitchFont lock Using the Font windowZero style CountryLength Using the Paper windowLine Spacing Auto LF with CRTimeout Printing Using the Paper windowTop Margin Paper OutDraft-10/12cpiCURRENT +10 Adjusting the printer’s vertical alignmentChanging the printer port Changing the printer portSaving setup data as a new configuration file Saving changed setup data in the current configuration fileEnter Importing setup data from a configuration file Returning to default settingsImporting setup data from a configuration file Using the Help window Exiting the User Setup UtilitySetting up for printing with Microsoft Windows Using the Printer with WindowsUsing the Printer with Windows Getting ready to print Getting ready to printPrinting a document Printing a document Selecting fonts in Windows applications Installing TrueType fontsTo enter the Sleep Mode To restore full power from the Sleep ModeControl Panel Operations Errors To switch between the Ready and Not-Ready ModesTo feed single-sheet paper into the printer To eject single-sheet paper from the printerSelecting paper types Paper HandlingSingle-Sheet Paper Manual Sheet Feeding Single-Sheet Paper Automatic Sheet FeedingPaper Handling Adjusting for paper thicknessManual sheet feeding Automatic sheet feedingClearing paper jams Automatic sheet feedingPaper release levers Setting up for printing with MS-DOS Using the Printer with MS-DOSSelecting fonts in MS-DOS applications Using the Printer with MS-DOSHow to pause printing Other Printing FeaturesLine feed Form feedAppendix a Troubleshooting Testing the printerTroubleshooting Short test Long testHexadecimal dump Troubleshooting Problem Possible Cause Troubleshooting guideWrong emulation is Check the emulation Choose a different line Return the printer to your Right during printing Right during printing Interference from nearby To check the default printer selection Checking system software settings in WindowsTo check the application printer selection To check the portChecking the port settings in the User Setup Utility Checking system software settings in MS-DOSPrinting Speed Pitch Draft cps/dpi Appendix B SpecificationsPaper Single-sheet manual feeding SpecificationsNow preparing the acrobat data Appendix F Glossary Parallel 7, 27, 55, 56 carton contents MS-DOS MS-DOS Customer service information

LC-90 NX-1010 specifications

The Star Micronics LC-90 NX-1010 is an advanced point-of-sale (POS) printer that embodies the perfect blend of innovation, reliability, and usability. Designed to meet the needs of modern retail environments, this printer is known for its speed, efficiency, and excellent print quality.

One of the key features of the LC-90 NX-1010 is its thermal printing technology, which allows for fast and silent operation, making it ideal for busy retail settings where quick transaction times are essential. With a print speed of up to 250 mm per second, it ensures that receipts are produced promptly, minimizing wait times for customers. This level of efficiency is complemented by the ability to print high-quality graphics and text, ensuring that receipts are not just functional but also visually appealing.

The LC-90 NX-1010 offers versatile connectivity options. It comes equipped with USB, Ethernet, and serial interfaces, allowing it to seamlessly integrate into various POS systems. This flexibility allows businesses to adapt the printer to their specific needs without major overhauls of existing systems. Furthermore, the printer supports multiple operating systems, including Windows and Linux, which broadens its usability across different platforms.

Another notable feature is the printer's robust design. Built for durability, the LC-90 NX-1010 can withstand the rigors of high-volume printing environments, making it a reliable choice for retail, hospitality, and other commercial applications. Its compact form factor allows it to fit into tight spaces without sacrificing functionality.

In terms of ease of use, the LC-90 NX-1010 simplifies maintenance with its easy paper-loading system and user-friendly interface. This minimizes downtime, ensuring that businesses can operate smoothly without interruptions.

Additionally, energy efficiency is a significant advantage of the LC-90 NX-1010. It is designed to consume less power compared to traditional printers, contributing to lower operational costs and promoting environmentally friendly practices.

In summary, the Star Micronics LC-90 NX-1010 is a cutting-edge POS printer that excels not only in performance but also in connectivity, durability, and energy efficiency. Its combination of fast printing speed, versatile connectivity options, and user-friendly features make it an outstanding choice for any business looking to enhance its transaction processing capabilities. This printer stands as a testament to Star Micronics' commitment to quality and innovation in the point-of-sale printing industry.
Top Page Image Contents