Star Micronics 800C user manual Installing the printer driver and TrueType fonts

Page 20

Chapter 2 Installing the printer driver and TrueType fonts

If you have prepared your printer, you can install the printer driver which accompanied this printer on floppy disk number one. This printer comes with two floppy diskettes. One disk contains the printer driver and the other contains the 35 scalable TrueType fonts which are designed especially for Windows version 3.1 applications printing. To operate the printer, you must follow these steps to install the printer driver software. Before installing the printer driver, however, we suggest that you take a few moments to check your system configuration to make sure that your computer is ready for the instal- lation.

System requirements

To run this printer driver you need an IBM compatible PC with at least a 386SX 16-MHz CPU and you must be running MS-DOS 3.3 or later and Windows 3.1 or later. The WinType 800C will not work properly on 286 based PCs and other earlier systems.

This printer requires at least 8 megabytes (MB) of memory (RAM) and the system soft- ware requires at least 5 megabytes of disk space on your system's hard drive. An addi- tional 1.85 megabytes is needed to install all of the 35 TrueType fonts.

A Microsoft-compatible mouse is also highly recommended. This manual assumes that you are using a mouse. If you are not using a mouse, please refer to your Windows 3.1 Users Guide for information on using the keyboard in place of a mouse.

A standard PC parallel printer port is required to connect the printer using a high quality Centronics compatible shielded printer cable.

Note: It is important that you use a properly manufactured cable. A poor quality cable may affect the output of this printer.

Installing the printer driver and TrueType fonts

If at any time during installation of the printer driver you need help, press <F1> or choose <Help> on the Setup screen.

Note: Remember that you need at least 5 megabytes of hard disk space to install this printer driver and 1.85 megabytes of hard disk space to install the 35 TrueType fonts.

Always make a backup copy of each disk in the software package and store the original disks in a safe place. Use the backup copies to install the software.

Steps:

1.Make sure your printer is connected to a printer port and that it is turned ON.

11

Page 19 Page 21
Image 20
Page 19 Page 21
Contents WinType 800C Bescheinigung des Importeurs Trademark AcknowledgmentsContents Maintenance & troubleshooting SpecificationsIntroduction How to use this manual Features of the printerReference information GlossaryPrinter components Paper trayPaper tray base Paper tray coverTop cover Bobbin sockets Vii Setting up your printer Unpacking and checking the package contentsDescription Model Number Size Sheets/Pack DescriptionModel Number Yield Per Roll Placing the printer Preparing to printLoading paper StepsGrooves for the bobbin Page Page Steps Power OFF Page Installing the printer driver and TrueType fonts Installing the printer driver and TrueType fontsPage Custom Install Without Install Font TrueType font samplesPrinting with WinType 800C Control panelMedia Type Dimensions Recommended Type Recommended print mediaOperating the printer Loading print mediaReplace the paper tray cover Printable area Printable Area Getting ready to print Page DIP switch settings Changing halftones and image quality Changing halftonesError High speed printing Click on Fast Print to Port Click on Use Max. MemoryFilm Roll Paper Size Monochrome Color Other buttons in the Options dialog box Intensity Steps Click on the Drop-down list box to reveal media sizes Replacing the film roll Do not touch this sensorPage Changing the film roll setting Page Printing with iron-on transfer Steps for transferring the image on the cloth Steps for the finishing process Page Maintenance & troubleshooting Maintaining your printerDampen a soft cloth with ethanol Page Wipe the paper feeders with the soft cloth Make sure that Ready lamp is lit Clearing paper jams Per eject. Proceed to onPage Transporting your printer Inside of the printer Remove the paper tray cover and the paper tray base Troubleshooting Region of problem DescriptionOverall print is light Check Possible remedy Printed image has vertical linesCheck Possible remedy Color variations are too large Patterns appear where print density is highOverall print is dark Check Possible remedy Two sheets of paper are fed at the same time Only part of the image is printed Check Possible remedyPaper jams occur frequently Check Possible remedy Other DIP switch settings Print Type Items that can be changed with the DIP switchesPinout of interface connector Specifications Reference informationPower supply Printer supply accessoriesMemory InterfacePrinter supply options Glossary Command ConfigurationError Diffusion DefaultGamma Correction HalftoneHandshaking Hex dumpPortrait PostScriptTitle bar TrueType fontSymbols IndexLPT1 RAM Customer service information Customer response

800C specifications

Star Micronics 800C is a state-of-the-art thermal printer designed to meet the high demands of retail, hospitality, and various other industries. This compact and efficient device excels in providing quick, high-quality printing solutions, offering a range of features that enhance its functionality and user experience.

One of the standout features of the Star Micronics 800C is its remarkable printing speed. Capable of delivering up to 250 mm per second, it ensures that receipts and labels are printed swiftly, significantly reducing customer wait times. This efficiency is crucial in fast-paced environments where time is of the essence.

The printer supports a variety of interfaces, including USB, Serial, and Ethernet, making it easy to integrate into existing systems. It also offers Bluetooth and Wi-Fi connectivity options, allowing for wireless printing. This flexibility means businesses can seamlessly connect the printer to various devices, enhancing operational efficiency.

In terms of print quality, the 800C utilizes high-resolution thermal printing technology, ensuring that text and graphics are sharp and clear. This is particularly important in retail settings where legibility can affect customer satisfaction and regulatory compliance. The printer supports multiple languages and character sets, making it suitable for international businesses.

Another noteworthy characteristic of the Star Micronics 800C is its compact design. Measuring just a small footprint, it can easily fit into limited counter space without sacrificing functionality. Additionally, the printer features an easy-to-load paper compartment, simplifying the process of changing rolls. This user-friendly design minimizes downtime and enhances productivity.

Durability is yet another key aspect of the 800C's design. Built to withstand the rigors of heavy use, it is constructed with high-quality materials that ensure longevity. The printer also has an energy-saving mode, which helps reduce power consumption, making it an environmentally friendly choice.

Moreover, the Star Micronics 800C is equipped with advanced firmware that allows for easy updates and enhancements. This means that businesses can benefit from the latest technological advancements without needing to purchase new hardware.

In conclusion, the Star Micronics 800C thermal printer combines speed, versatility, and robustness, making it an ideal solution for businesses that require efficient and high-quality printing. Its range of features, including connectivity options and energy-saving technologies, position it as a reliable choice for any retail or hospitality environment.
Top Page Image Contents