Star Micronics 800C user manual Loading paper, Steps

Page 13

Loading paper

You must always follow the Steps below to load paper before installing the film roll.

Steps:

1. Insert the paper tray base into the positioning holes at the back side of the printer.

2. Fan the paper. This will prevent paper jams from occurring.

3. Load one sheet of paper into the paper tray base with the printing side facing the paper tray base.

Note: Recommended coated paper will have the words "PRINT OPPOSITE SIDE" printed in light blue letters on the back side.

4.After one sheet has been inserted all the way into the printer, add the remainder of the stack of paper.

Note: The paper tray can hold up to 50 sheets of coated/presentation grade paper at one time. Be certain to insert the print media with the print side facing down when inserting into the printer.

4

Image 13

Contents WinType 800C Trademark Acknowledgments Bescheinigung des ImporteursContents Specifications Maintenance & troubleshootingIntroduction Features of the printer How to use this manualReference information GlossaryPaper tray Printer componentsPaper tray base Paper tray coverTop cover Bobbin sockets Vii Unpacking and checking the package contents Setting up your printerModel Number Yield Per Roll DescriptionDescription Model Number Size Sheets/Pack Preparing to print Placing the printerSteps Loading paperGrooves for the bobbin Page Page Steps Power OFF Page Installing the printer driver and TrueType fonts Installing the printer driver and TrueType fontsPage Custom Install TrueType font samples Without Install FontControl panel Printing with WinType 800CRecommended print media Media Type Dimensions Recommended TypeLoading print media Operating the printerReplace the paper tray cover Printable area Printable Area Getting ready to print Page DIP switch settings Changing halftones Changing halftones and image qualityError High speed printing Click on Use Max. Memory Click on Fast Print to PortFilm Roll Paper Size Monochrome Color Other buttons in the Options dialog box Intensity Steps Click on the Drop-down list box to reveal media sizes Do not touch this sensor Replacing the film rollPage Changing the film roll setting Page Printing with iron-on transfer Steps for transferring the image on the cloth Steps for the finishing process Page Maintaining your printer Maintenance & troubleshootingDampen a soft cloth with ethanol Page Wipe the paper feeders with the soft cloth Make sure that Ready lamp is lit Per eject. Proceed to on Clearing paper jamsPage Transporting your printer Inside of the printer Remove the paper tray cover and the paper tray base Region of problem Description TroubleshootingCheck Possible remedy Printed image has vertical linesOverall print is light Check Possible remedy Overall print is dark Check Possible remedy Patterns appear where print density is highColor variations are too large Paper jams occur frequently Check Possible remedy Only part of the image is printed Check Possible remedyTwo sheets of paper are fed at the same time Print Type Items that can be changed with the DIP switches Other DIP switch settingsPinout of interface connector Reference information SpecificationsPrinter supply accessories Power supplyMemory InterfacePrinter supply options Glossary Configuration CommandError Diffusion DefaultHalftone Gamma CorrectionHandshaking Hex dumpPostScript PortraitTitle bar TrueType fontIndex SymbolsLPT1 RAM Customer response Customer service information