5. After inserting the paper, place the paper tray cover on top
of the paper tray base in the direction indicated by the arrows in the illustra- tion at the right.
Installing the film roll
Caution: It is essential that you have paper in the paper tray, that the paper tray cover and the top cover support are in place when you open the top cover of the printer. Failing to do so will allow the top cover to drop down when opened. This can cause unexpected and painful injury.
Steps:
1.Insert the film roll bobbins into holes on both sides of the rolls.
Be certain to insert the bobbins with wedges into the holes that are shaped in the same way. Those portions of the bobbins are colored green.
This side has no
Align the bobbin protrusions with the grooves in the film roll.
Green
Green
grooves for the bobbin.
2.Unwrap the film roll and gently pull the two halves apart. They are held together with a light adhesive.
5