Star Micronics 800C user manual Click on Fast Print to Port, Click on Use Max. Memory

Page 36

3. Double-click on the Printers icon.

4.Click on STAR WinType 800C on LPT1 in the Installed Printers list, if LPT1 is the port to which this printer is connected.

5.Click on the Setup button.

6.Click on the Options button.

7.Click on Fast Print to Port.

Putting an X in the Fast Print to Port box will cause your print job to be sent directly to the printer without going through Windows Print Manager. This will increase printing speed.

Note:	Fast Print to Port works only in 386 Enhanced mode of IBM PC/AT
	compatible computers.
Note:	If you are linked to a network or printing to a file, do not use Fast Print to
	Port.

8.Click on Use Max. Memory.

Putting an X in the Use Max. Memory box will increase printing speed by increasing the memory (RAM) used to process your print job.

Note: If your application is low on memory, do not use Use Max. Memory. If there is not enough memory when this is checked, printing speed will not increase.

Use Max. Memory memory size varies according to the conditions under which it is being used. Please refer to the table on the next page for memory sizes. If Use Max. Memory is not being used, memory size is 1MB regardless of the conditions.

27

Image 36

Contents WinType 800C Bescheinigung des Importeurs Trademark AcknowledgmentsContents Maintenance & troubleshooting SpecificationsIntroduction How to use this manual Features of the printerReference information GlossaryPrinter components Paper trayPaper tray base Paper tray coverTop cover Bobbin sockets Vii Setting up your printer Unpacking and checking the package contentsDescription Model Number Yield Per RollDescription Model Number Size Sheets/Pack Placing the printer Preparing to printLoading paper StepsGrooves for the bobbin Page Page Steps Power OFF Page Installing the printer driver and TrueType fonts Installing the printer driver and TrueType fontsPage Custom Install Without Install Font TrueType font samplesPrinting with WinType 800C Control panelMedia Type Dimensions Recommended Type Recommended print mediaOperating the printer Loading print mediaReplace the paper tray cover Printable area Printable Area Getting ready to print Page DIP switch settings Changing halftones and image quality Changing halftonesError High speed printing Click on Fast Print to Port Click on Use Max. MemoryFilm Roll Paper Size Monochrome Color Other buttons in the Options dialog box Intensity Steps Click on the Drop-down list box to reveal media sizes Replacing the film roll Do not touch this sensorPage Changing the film roll setting Page Printing with iron-on transfer Steps for transferring the image on the cloth Steps for the finishing process Page Maintenance & troubleshooting Maintaining your printerDampen a soft cloth with ethanol Page Wipe the paper feeders with the soft cloth Make sure that Ready lamp is lit Clearing paper jams Per eject. Proceed to onPage Transporting your printer Inside of the printer Remove the paper tray cover and the paper tray base Troubleshooting Region of problem DescriptionPrinted image has vertical lines Check Possible remedyOverall print is light Check Possible remedy Patterns appear where print density is high Overall print is dark Check Possible remedyColor variations are too large Only part of the image is printed Check Possible remedy Paper jams occur frequently Check Possible remedyTwo sheets of paper are fed at the same time Other DIP switch settings Print Type Items that can be changed with the DIP switchesPinout of interface connector Specifications Reference informationPower supply Printer supply accessoriesMemory InterfacePrinter supply options Glossary Command ConfigurationError Diffusion DefaultGamma Correction HalftoneHandshaking Hex dumpPortrait PostScriptTitle bar TrueType fontSymbols IndexLPT1 RAM Customer service information Customer response