Star Micronics 800C user manual High speed printing, Changing color balance

Changing color balance

You can use the color balance scroll bars, also part of the Options dialog box, to change the balance of the colors you are going to use. Again, this printer driver is equipped with scroll bars for the three colors of red, green and blue. This is good for enhancing some of the colors you want to use in your presentation documents. For example, if you move the R: (red) scroll bar to the right, you can increase the reddishness of the overall image. Use the following illustration to set the density you want.

Weak	Standard		Strong
	(set in increments of 1)
Minimum –64		0	Maximum +64

Note: Gamma correction affects the 40% to 60% of the color selected. Density adjusts the concentration of the entire body of color selected.

7.When you have finished making your changes, click on the OK button of the Options dialog box.

8.Click on the OK button of the Setup dialog box.

9.Click on the Close button to save your changes and return to the Program Manager.

High speed printing

There are two parameters from which you can choose for printing speed. These param- eters are under the Performance box in the Options dialog box. Follow the Steps below to change printing speeds.

Steps:

1.Open the Main group by double click- ing on its icon.

2.Double-click on the Control Panel icon in the Main group.

26