Broadband Router User Guide
LAN Screen
Use the LAN link on the main menu to reach the LAN screen An example screen is shown below.
Figure 6: LAN Screen
Data - LAN Screen
TCP/IP |
|
IP Address | IP address for the |
| the default value unless the address is already in use or your LAN is |
| using a different IP address range. In the latter case, enter an unused IP |
| Address from within the range used by your LAN. |
Subnet Mask
DHCP Server
Buttons
Save
Cancel
The default value 255.255.255.0 is standard for small (class "C") networks. For other networks, use the Subnet Mask for the LAN segment to which the
•If Enabled, the
•If you are already using a DHCP Server, this setting must be Disabled, and the existing DHCP server must be
•The Start IP Address and Finish IP Address fields set the values used by the DHCP server when allocating IP Addresses to DHCP clients. This range also determines the number of DHCP clients supported.
See the following section for further details on using DHCP.
Save the data on screen.
The "Cancel" button will discard any data you have entered and reload the file from the Broadband Router.
14