TRENDnet TW100-BRF114U manual Connection Status Pptp, Data Pptp Screen, Pptp Status

Broadband Router User Guide

Connection Status - PPTP

If using PPTP (Peer-to-Peer Tunneling Protocol), a screen like the following example will be displayed when the "Connection Details" button is clicked.

Figure 29: PPTP Status Screen

Data - PPTP Screen

Connection
Physical Address	The hardware address of this device, as seen by remote devices on
	the Internet. (This is different to the hardware address seen by
	devices on the local LAN.)
IP Address	The IP Address of this device, as seen by Internet users. This address
	is allocated by your ISP (Internet Service Provider).
PPTP Status	This indicates whether or not the connection is currently established.
	• If the connection does not exist, the "Connect" button can be
	used to establish a connection.
	• If the connection currently exists, the "Disconnect" button can be
	used to break the connection.

Connection Log

Connection Log

Buttons

Connect

•The Connection Log shows status messages relating to the existing connection.

•The "Clear Log" button will restart the Log, while the Refresh button will update the messages shown on screen.

If not connected, establish a connection to your ISP.

42