TRENDnet TW100-BRF114U manual Routing Screen, Using this Screen, Static Routing Table

Page 83

Advanced Administration

Routing

Overview

•If you don't have other Routers or Gateways on your LAN, you can ignore the "Routing" page completely.

•If the TW100-BRF114U is only acting as a Gateway for the local LAN segment, ignore the "Routing" page even if your LAN has other Routers.

•If your LAN has a standard Router (e.g. Cisco) on your LAN, and the TW100-BRF114U is to act as a Gateway for all LAN segments, enable RIP (Routing Information Protocol) and ignore the Static Routing table.

•If your LAN has other Gateways and Routers, and you wish to control which LAN seg- ments use each Gateway, do NOT enable RIP (Routing Information Protocol). Configure the Static Routing table instead. (You also need to configure the other Routers.)

•If using Windows 2000 Data center Server as a software Router, enable RIP on the TW100-BRF114U, and ensure the following Windows 2000 settings are correct:

•Open Routing and Remote Access

•In the console tree, select Routing and Remote Access , [server name], IP Routing,

RIP

•In the "Details" pane, right-click the interface you want to configure for RIP version 2, and then click "Properties".

•On the "General" tab, set Outgoing packet protocol to "RIP version 2 broadcast", and Incoming packet protocol to "RIP version 1 and 2".

Routing Screen

The routing table is accessed by the Routing link on the Administration menu.

Using this Screen

Generally, you will use either RIP (Routing Information Protocol) OR the Static Routing Table, as explained above, although is it possible to use both methods simultaneously.

Static Routing Table

•If RIP is not used, an entry in the routing table is required for each LAN segment on your Network, other than the segment to which this device is attached.

•The other Routers must also be configured. See Configuring Other Routers on your LAN later in this chapter for further details and an example.

79

Image 83

Contents Page Page Table of Contents Multi-Function TW100-BRF114U Regulatory Approvals Overview General Problems Internet Access PrintingIntroduction Broadband Router FeaturesInternet Access Features Advanced Internet Functions LAN FeaturesConfiguration & Management Package Contents Front-mounted LEDs Physical DetailsRear Panel Requirements InstallationProcedure Choose an Installation SiteCheck the LEDs Power UpConnect WAN Cable Connect Printer CableTo Do this Refer to SetupOverview Preparation Configuration ProgramUsing UPnP Using your Web BrowserIf you cant connect DSL Modems Setup WizardCommon Connection Types Cable ModemsSingTel RAS Other Modems e.g. BroadbandBig Pond Australia Navigation & Data Input Home ScreenButtons LAN ScreenData LAN Screen What Dhcp Does Using the TW100-BRF114Us Dhcp ServerUsing another Dhcp Server To Configure your PCs to use DhcpPassword Dialog Password ScreenWindows Clients PC ConfigurationTCP/IP Settings Overview Using Specify an IP Address Checking TCP/IP Settings Windows 9x/MEUsing Dhcp Gateway Tab Win 95/98 Windows NT4.0 TCP/IP Checking TCP/IP Settings Windows NT4.0Specify an IP Address Obtain an IP address from a Dhcp ServerWindows NT4.0 Add Gateway Windows NT4.0 DNS Network Configuration Win Checking TCP/IP Settings WindowsTCP/IP Properties Win Using a fixed IP Address Use the following IP AddressNetwork Configuration Windows XP Checking TCP/IP Settings Windows XPTCP/IP Properties Windows XP For Windows XP Internet AccessAccessing AOL For Windows 9x/ME/2000Print Port Driver Setup Printer Setup for WindowsPort Options ManagementRetry Interval PortBanner LPD/LPR Printing Windows NT 4.0 Server ConfigurationAdding the Printer Windows 2000/2003 Server ConfigurationWindows 2000 Select Port Client PC Setup for LPD/LPR PrintingNetwork Path Windows 98/ME To act as a Dhcp Client recommended Macintosh ClientsLinux Clients Fixed IP AddressField Data Example Printing Setup on LinuxPrinting Setup Other Unix SystemsStatus Screen Operation and StatusOperation System Data Status ScreenInternet Connection Log Connection Status PPPoEData PPPoE Screen ConnectionMessage Description Connection Log MessagesPptp Status Connection Status PptpData Pptp Screen Data Big Pond Screen Connection Status Telstra Big PondRAS Plan Connection Details SingTel RASData RAS Screen Connection Details Fixed/Dynamic IP Address Network Mask Default Gateway DNS IP Address Dhcp ClientData Fixed/Dynamic IP address Screen Overview Advanced FeaturesAccess Control To use this featureGroup Access Control ScreenData Access Control Screen GroupInternet Access Group Members Group Members ScreenData Default Schedule Screen Default Schedule ScreenAdd New Service Services ScreenData Services Screen Available ServicesMAC address Access Control LogDate/Time Source IP addressData Dynamic DNS Screen Ddns ServiceDynamic DNS Dynamic DNS ScreenDdns Data Ddns Service User Name Password/Key Domain Name Ddns StatusCommunication Applications Advanced Internet ScreenCommunication Applications Special ApplicationsSpecial Applications Screen Data Special Applications Screen Using a Special ApplicationMulti-DMZ Filter Strings URL FilterURL Filter Screen Data URL Filter ScreenAdd Virtual ServersIP Address seen by Internet Users Properties Virtual Servers ScreenData Virtual Servers Screen ServersAppropriate Server software Defining your own Virtual ServersFor each entry, the PC must be running Connecting to the Virtual Servers IP Address WAN Port ConfigurationData WAN Port Screen IdentificationLogin Manual Connect/Disconnect Default Copy from PC Save CancelConnection Behavior Auto-disconnect Idle Time-out Automatic Connect/DisconnectFirmware Advanced AdministrationUpgrade Network DiagData Config File Screen Config FileData Logs Screen Enable LogsLogs Mail Address Mail ReportsDNS Lookup Network DiagnosticsData Network Diagnostics Screen PingUPnP Backup DNSOptions Data Options ScreenMTU size Allow Internet access to be disabledPC Database Screen PC DatabaseGenerate Report AdministrationData PC Database Screen Known PCsPC Properties PC Database AdminData PC Database Admin Screen Standard Screen Add as NewEntry Enable Remote Management Port Number Current IP Ad- dress Remote AdminData Remote Administration Screen Remote AdministrationStatic Routing Table Using this ScreenRouting Routing ScreenStatic Routing Table Entries Enable RIPData Routing Screen Static RoutingLocal Router Configuring Other Routers on your LANFor the TW100-BRF114Us Routing Table For Router As Default RouteStatic Routing Example Other Routers on the Local LANFor Router Bs Default Route Firewall Enable DoS Firewall ThresholdSecurity Data Security ScreenAllow IPsec Allow Pptp Allow L2TP OptionsRespond to To perform the Firmware Upgrade Upgrade FirmwareProblem 1 Cant connect to the TW100-BRF114Uto configure it TroubleshootingGeneral Problems Internet AccessPrinting To remove an existing printer port installationAppendix a Troubleshooting Broadband Router User Guide Multi-Function TW100-BRF114U Appendix B SpecificationsCE Marking Warning Regulatory ApprovalsCE Standards Limited Warranty Technical Support Appendix B Specifications