Broadband Router User Guide
| nect buttons unless the setting "Connect automatically, as re- |
| quired" is disabled. |
Connection Log |
|
Connection Log | • The Connection Log shows status messages relating to the |
| existing connection. |
| • The Clear Log button will restart the Log, while the Refresh |
| button will update the messages shown on screen. |
Buttons |
|
Connect | If not connected, establish a connection to Telstra Big Pond. |
Disconnect | If connected to Telstra Big Pond, terminate the connection. |
Clear Log | Delete all data currently in the Log. This will make it easier to read |
| new messages. |
Refresh | Update the data on screen. |
Connection Details - SingTel RAS
If using the SingTel RAS access method, a screen like the following example will be displayed when the "Connection Details" button is clicked.
Figure 31: Connection Details - RAS
Data - RAS Screen
Internet |
|
RAS Plan | The RAS Plan which is currently used. |
Physical Address | The hardware address of this device, as seen by remote devices on |
| the Internet. (This is different to the hardware address seen by |
| devices on the local LAN.) |
IP Address | The IP Address of this device, as seen by Internet users. This address |
44