TRENDnet TW100-BRF114U manual Data Remote Administration Screen

Broadband Router User Guide

Remote Admin

If enabled, this feature allows you to manage the TW100-BRF114U via the Internet.

Figure 50: Remote Administration Screen

Data - Remote Administration Screen

Remote Administration

Enable Remote Management

Port Number

Current IP Ad- dress

Enable to allow management via the Internet. If Disabled, this device will ignore management connection attempts from the Internet.

Enter a port number between 1024 and 65535 (8080 is recom- mended). This port number must be specified when you connect (see below).

Note: The default port number for HTTP (Web) connections is port 80, but using port 80 here will prevent the use of a Web "Virtual Server" on your LAN. (See Advanced Internet - Virtual Servers)

You must use this IP Address to connect (see below).

This IP Address is allocated by your ISP. But if using a Dynamic IP Address, this value can change each time you connect to your ISP. So it is better if your ISP allocates you a Fixed IP Address.

To connect from a remote PC via the Internet

1.Ensure your Internet connection is established, and start your Web Browser.

2.In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the TW100- BRF114U. If the port number is not 80, the port number is also required. (After the IP Address, enter ":" followed by the port number.)

e.g.

HTTP://123.123.123.123:8080

This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.

78