TRENDnet TW100-BRF114U manual Rear Panel

Introduction

Rear Panel

	Figure 3: Rear Panel
USB Printer Port	If you wish to share a printer, connect it here.
Reset Button	This button has two (2) functions:
	• Reboot. When pressed and released, the TW100-BRF114U will
	reboot (restart).
	• Clear All Data. This button can also be used to clear ALL data
	and restore ALL settings to the factory default values.
	To Clear All Data and restore the factory default values:
	1. Power Off.
	2. Hold the Reset Button down while you Power On.
	3. Keep holding the Reset Button for a few seconds, until the RED
	LED has flashed TWICE.
	4. Release the Reset Button. The TW100-BRF114U is now using
	the factory default values.
WAN port	Connect the DSL or Cable Modem here. If your modem came with a
(10/100BaseT)	cable, use the supplied cable. Otherwise, use a standard LAN cable.
10/100BaseT	Use standard LAN cables (RJ45 connectors) to connect your PCs to
LAN connections	these ports.
	Note:
	Any LAN port on the TW100-BRF114U will automatically function
	as an "Uplink" port when required. Just connect any port to a normal
	port on the other hub, using a standard LAN cable.
Power port	Connect the supplied power adapter here.

5