Xantrex Technology SW Communications Adapter owner manual Keyboard Commands, Keystroke Function

3.0 OPERATION

Keyboard Commands

The following keystrokes enable navigation through the menus and provide the means to change available settings.

Keystroke	Function
1-8	Select inverter:
	1 through 8 is the inverter's ID number. 1 is the default.
L	Menu Headings –
R	Menu Headings +
U	Menu Itme – (towards top)
D	Menu Itme + (towards bottom)
- or _	Set Point – (lower value)
+ or =	Set Point + (higher value)
I	Inverter On/OFF Menu
	(same as the RED button on the inverter control panel)
	Generator On/OFF Menu
G	(same as the GREEN button on the inverter control
	panel)
	Setup Menu
<Ctrl> <S>	(same as pushing Generator and On/OFF Menu at the
	same time)
? or /	LED Status
V	Version number of SWCA
	Set terminal mode
T	If you see lots of strange characters display, trying
	pressing "T" for terminal mode.

Table 3-3

Keyboard Commands for using Terminal Emulation Programs

©2002 Xantrex Technology Inc.

P/N 973-0022-01-01 Rev A 04/2002 13