Xantrex Technology SW Communications Adapter Accessing Help Information from the Swcps Program

3.0 OPERATION

Accessing HELP Information from the SWCPS Program

Help is available while using the SWCPS program by pressing F10 on the computer keyboard.

To leave the help screen, press the ￿￿￿key to return to control panel simulation program.

Accessing the SETUP MENU from the SWCPS Program

To access the inverter SETUP MENU, press ALT-F8 together. This feature is available for inverters with Rev 4.01 and higher software versions.

To leave the SETUP MENU, press ￿which returns you to the SET INVERTER main menu display.

Switching Between Multiple SWCA Adapters/inverters

To select another inverter, simply press the number key for the SWCA adapter that was programmed in and written on the outside of the adapter as previously discussed. Use numbers from 1 to 8.

Exiting the SWCPS Program

To exit the SWCPS program, press ALT-X. You can also use the ESC key to quit as well.

©2002 Xantrex Technology Inc.

P/N 973-0022-01-01 Rev A 04/2002 15