Xantrex Technology 400 Plus, 400 R manual Using the Air Compressor

Page 48

Operation

Using the Air Compressor

WARNING: Fire hazard

The compressor is designed for short term operation only. Operating the compressor over an extended period of time will cause the compressor unit to overheat, which could lead to fire.

Allow the compressor to cool down for 10 minutes after each 10 minutes of continuous operation.

WARNING: Fire hazard

Do not leave the compressor unattended while in operation. Keep out of reach of children.

WARNING: Risk of personal injury or damage to equipment

Do not exceed the recommended pressure of either the compressor or the object being inflated. The compressor is capable of inflating to 250 PSI. If either recommended pressure is exceeded, an explosion may result.

WARNING: Risk of personal injury or damage to equipment

If the XPower Powerpack shuts off due to an over-temperature condition, turn OFF the power switch and allow the compressor to cool for 15 minutes before re-starting. If the power switch is not turned off before the unit reaches an acceptable operating temperature, the unit will automatically turn itself back on.

If left unattended it is possible that the unit can over-inflate the object and create an explosion hazard.

CAUTION

The XPower Powerpack cannot be used to inflate large capacity inflatables such as float tubes, large air mattresses, and inflatable boats. These types of products require extended inflating times which may damage the compressor.

3-22	975-0162-01-01

Image 48

Contents Powerpack 400 R Owner’s GuideDate and Revision Purpose Conventions UsedReferences to XPower Powerpack Related InformationImportant Safety Instructions Figure i Basic Safety Important Safety Instructions Precautions When Working With Batteries 975-0162-01-01 Vii Precautions for Using Rechargeable Appliances Contents Operation Maintenance TroubleshootingSpecifications Xii Figures Xiv About the XPower Powerpack IntroductionComprehensive Protection Automatic OverloadLow Battery Protection Jump-Start Cables Safety FuseOverheating Features ContentsXPower Powerpack Features Front PanelFeature Description DC Power Socket canStorage Compartment Compressor Nozzle Adaptor compartmentRadio XPower Powerpack 400 R only Back Panel Radio Enlargement5Air Compressor Features Air CompressorLight ON/OFF Switch 400 Plus Light ON/OFF/Pulse Switch 400R Emergency Light and Jump-Start PortAccessories 7Accessories and Accessory BagOperation Operating Conditions and GuidelinesDry Cool Ventilated Safe Protected from battery gases Choosing a LocationRecharging the XPower Powerpack Battery Charging with the AC Charger 2Charging with AC Power Charging with the DC-to-DC Accessory Cable 3Charging with DC Power Recharging with a Generator’s Regulated 12 Vdc Outlet Recharging From a Solar Panel To recharge with a solar panelChecking the State-of-Charge 5Checking the State-of-ChargeAC Appliances AC Appliance Watts a Hours bLow-Battery Alarm Operating AC AppliancesOverload Protection Vdc Appliances Vdc Appliance Watts a Hours bOperating DC Appliances 7Operating AC AppliancesRequired How to Condition Action Control Panel OperationCharging Status Jump-Starting a Vehicle’s Engine To jump-start a vehicle or boat engine Using the Emergency Light 10Emergency Light11Using the Emergency Light Using the Air Compressor 12XPower Powerpack Air Compressor Over-Temperature Safety Protection To use a Nozzle AdapterInflating Tires TiresBicycle Tires Other InflatablesTo inflate your vehicle, motorcycle, or bicycle tires Inflating Small Sports Equipment To inflate small sports equipmentPower Draw Radio FeaturesListening to the AM Band Required How to Condition Required Action Radio OperationConnecting to an External Battery 18Basic Jump-start Cable Safety 19Connecting the XPower Powerpack to an External Battery Maintenance Battery MaintenanceReplacing the Internal Battery Battery LifeObtaining a Replacement Battery Battery Capacity AhBattery Replacement Procedure FastenersReplacing the Incandescent Light To replace a light bulbReplacing the External Fuse To replace the external fuseRecycling Maintenance 975-0162-01-01 Specifications Electrical SpecificationsDC Section AC Power Section Internal Battery Charging Controller SystemRadio XPower Powerpack 400 R only AccessoriesAir Compressor Physical Specifications XPower Powerpack Physical specifications Plus 400 RTroubleshooting Common ProblemsBuzz in Audio Equipment Television InterferenceTroubleshooting Reference Problem Possible Cause Solution1Troubleshooting reference Charging Green Voltage at the AC Use AC wall outlet that supplies 1Troubleshooting reference Warranty and Return WarrantyDisclaimer ProductReturn Material Authorization Policy ExclusionsReturn Procedure Out of Warranty ServiceInformation About Your System Serial Number Purchased From Purchase DateWA-6