Xantrex Technology 400 Plus, 400 R Replacing the Incandescent Light, To replace a light bulb

Page 63

Replacing the Incandescent Light

4.After removing the old battery, position the new battery close to the back of the XPower Powerpack.

Make sure the positive battery terminal is next to the red positive (+) internal cable and the black negative terminal is next to the black negative (–) internal cable.

5.Securely fasten the bolt and washer that holds the red positive (+) cable to the positive (+) battery terminal and the black negative (–) cable to the negative (–) battery terminal.

6.Do not overtighten the bolt. Consult the battery manufacturer for torque specifications.

7.On the XPower Powerpack, replace the battery cover and the four fasteners.

8.Dispose of the old battery in an environmentally responsible manner.

Replacing the Incandescent Light

To replace a light bulb:

1.Turn the light switch off.

2.Unscrew the cover and lens.

3.Gently grasp the bulb and pull to remove the light reflector assembly and the bulb.

4.While holding the light reflector assembly, gently unscrew the black knob at the back of the assembly.

5.Remove the old bulb and insert a replacement bulb of the same type and rating into the light reflector assembly. Replacement Lamp: Part # 030-9951-01 5 watt 12-v lamp.

6.Holding the light reflector assembly, gently screw the black knob on to the back of the assembly.

7.Reattach the lens and cover.

975-0162-01-01

4-5

Image 63

Contents Owner’s Guide Powerpack 400 RDate and Revision Conventions Used PurposeRelated Information References to XPower PowerpackImportant Safety Instructions Figure i Basic Safety Important Safety Instructions Precautions When Working With Batteries 975-0162-01-01 Vii Precautions for Using Rechargeable Appliances Contents Operation Maintenance TroubleshootingSpecifications Xii Figures Xiv Automatic Overload About the XPower PowerpackIntroduction Comprehensive ProtectionLow Battery Protection Jump-Start Cables Safety FuseOverheating Contents FeaturesFront Panel XPower Powerpack FeaturesDC Power Socket can Feature DescriptionCompressor Nozzle Adaptor compartment Storage CompartmentBack Panel Radio Enlargement Radio XPower Powerpack 400 R onlyAir Compressor 5Air Compressor FeaturesEmergency Light and Jump-Start Port Light ON/OFF Switch 400 Plus Light ON/OFF/Pulse Switch 400R7Accessories and Accessory Bag AccessoriesOperating Conditions and Guidelines OperationChoosing a Location Dry Cool Ventilated Safe Protected from battery gasesRecharging the XPower Powerpack Battery Charging with the AC Charger 2Charging with AC Power Charging with the DC-to-DC Accessory Cable 3Charging with DC Power Recharging with a Generator’s Regulated 12 Vdc Outlet To recharge with a solar panel Recharging From a Solar Panel5Checking the State-of-Charge Checking the State-of-ChargeAC Appliance Watts a Hours b AC AppliancesOperating AC Appliances Low-Battery AlarmOverload Protection Vdc Appliance Watts a Hours b Vdc Appliances7Operating AC Appliances Operating DC AppliancesControl Panel Operation Required How to Condition ActionCharging Status Jump-Starting a Vehicle’s Engine To jump-start a vehicle or boat engine 10Emergency Light Using the Emergency Light11Using the Emergency Light Using the Air Compressor 12XPower Powerpack Air Compressor To use a Nozzle Adapter Over-Temperature Safety ProtectionOther Inflatables Inflating TiresTires Bicycle TiresTo inflate your vehicle, motorcycle, or bicycle tires To inflate small sports equipment Inflating Small Sports EquipmentPower Draw Radio FeaturesListening to the AM Band Radio Operation Required How to Condition Required ActionConnecting to an External Battery 18Basic Jump-start Cable Safety 19Connecting the XPower Powerpack to an External Battery Battery Maintenance MaintenanceBattery Life Replacing the Internal BatteryBattery Capacity Ah Obtaining a Replacement BatteryFasteners Battery Replacement ProcedureTo replace a light bulb Replacing the Incandescent LightTo replace the external fuse Replacing the External FuseRecycling Maintenance 975-0162-01-01 Specifications Electrical SpecificationsDC Section Internal Battery Charging Controller System AC Power SectionRadio XPower Powerpack 400 R only AccessoriesAir Compressor XPower Powerpack Physical specifications Plus 400 R Physical SpecificationsTelevision Interference TroubleshootingCommon Problems Buzz in Audio EquipmentProblem Possible Cause Solution Troubleshooting Reference1Troubleshooting reference Charging Green Voltage at the AC Use AC wall outlet that supplies 1Troubleshooting reference Warranty Warranty and ReturnProduct DisclaimerExclusions Return Material Authorization PolicyOut of Warranty Service Return ProcedureSerial Number Purchased From Purchase Date Information About Your SystemWA-6