Xantrex Technology GT3.0 owner manual Standard Features, Mppt

	About the Xantrex Grid Tie Solar Inverter
PV compatibility	The GT Inverter is designed to take advantage of solar modules configured as high
	voltage PV string arrays—single crystalline, poly crystalline, or thin film—with a
	195 to 550 Vdc input voltage Maximum Power Point range.
Maximum Power	The GT Inverter uses Xantrex proprietary Maximum Power Point Tracking
Point Tracking	(MPPT) technology to harvest the maximum amount of energy from the solar
(MPPT)	array. MPPT learns your array’s specific characteristics, maximizing its output at
	all times.
High efficiency	The high-frequency, solid-state design of the GT Inverter is extremely efficient—
	up to 95%.
Expandable	Multiple GT Inverters may be connected in a parallel configuration for increased
	net metering capacity or future system growth.
Communications	The GT Inverter uses the Xanbus® Communications protocol, enabling it to
protocol	communicate with other units connected in parallel within the system. For more
	information, see “Xanbus Network Technology” on page 3–12.

Standard Features

The GT Inverter has the following standard features:

•Sealed inverter section with multiple wiring options to facilitate a variety of installation requirements (e.g., hard-wired, “quick-connects,” wiring box with terminals, or with AC/DC disconnect);

•LCD providing easy-to-read system status and daily cumulative energy production information;

•Two LED indicator lights providing status and ground fault indication;

•Wiring box providing protection for all AC and DC connections and eliminating exposed “live” wiring if the inverter is removed.

WARNING: Shock hazard

The 600 volt DC/AC disconnect in the wiring box meets NEC Article 690. It is a non- serviceable component and shall remain in place. Removal can expose energized conductors.

975-0131-01-01 1–3