Xantrex Technology GT3.0 Offline Mode, To view unit-specific screens in a multiple unit system

Front Panel Display Screens and What They Mean

*In a multiple unit system with communications cables properly installed, the system values displayed are for the entire system. For example, in a two-inverter system, if inverter #1 is producing 1500 W and inverter #2 is producing 2000 W, both inverters display a total system power of 3500 W. Time online and array readings are for the local inverter and PV array associated with that inverter.

Additional	In addition, to the normal system message screens, additional screens specific to
messages for	each GT Inverter unit can be displayed when the unit is networked to other GT
multiple unit	Inverters. These screens are only available on multiple unit systems.
systems only	To view unit-specific screens in a multiple unit system:
	1. Tap the Xantrex logo near the LCD to advance the display to the next screen.
	Continue tapping until the final system message screen (“Grid Readings”, in
	Table 5-3 above) is displayed.
	2. Tap again. Normal operation screens shown in Table 5-4 are displayed in the
	order given, as you tap successively on the unit.
	If you continue to tap the unit, then the LCD will cycle through all of the available
	normal operation screens. Each message is displayed for up to 30 seconds. If you
	do not tap again within that time period, then the LCD backlight turns off and the
	display reverts to the default normal operation screen (Table 5-2).
	Table 5-4Additional Normal Operation Screens for Each GT Inverter Unit in a
	Multiple Unit System
	Tap	Display	Description
	6th time		Power being produced by this unit now.
			Cumulative energy produced by this unit today.
	7th time		Lifetime energy produced by this GT Inverter unit

Offline Mode

Offline default	At night and when no power				s being produced by the PV array (offline mode), the
display	GT Inverter displays he screen shown in Table 5-5.
	Table 5-5Offline Mode Default Display
	Display					Description
				Displayed at all times while the system is offline.
Offline messages	Additio al message screens can be viewed when the system is offline by tapping
for all systems		Unit150
	the Xantrex ogo near the LCD. Each additional tap displays the next screen, in
	Today1.250kWh
	the order shown		Table -6.
	Unit Lifetime
975-0131-01-01	InverterOffline		150kWh			5–5