TRENDnet TU3H2PIE manual

Page 6

10.Insert the TU3-H2PIE card firmly into an available PCIe slot.

11.Connect an available 4-pin Molex power cable

from the computer's power supply to the TU3-H2PIE card.

12.Turn ON the computer and wait until the Windows desktop appears.

Note: For Windows 7/Vista, drivers will install automatically. Please skip to step 18. For Windows XP, continue on to step 13.

13.The Found New Hardware Wizard appears Select No, not this time and then click Next.

14.Select Install this software automatically (recommended) and then click Next.

4

Image 6
Contents TU3-H2PIE Table of Contents Before You Start CPUHow to Install Click Finish Page Your Installation is now complete Technical Specifications Hardware Troubleshooting Have a USB 1.1/2.0 cable. Can it work with USB 3.0 devices?Limited Warranty TU3-H2PIE 2 Years Limited WarrantyPage Page Page Copyright 2011. All Rights Reserved. TRENDnet